How to flash spreadtrum phones

how to flash spreadtrum phone
Are you tired of your slow and outdated Spreadtrum phone? Do you wish there was a way to give it a new lease on life? Well, look no further! Flashing your Spreadtrum phone is the answer. Not only will it boost performance, but it can also update your device to the latest firmware and security patches. In this post, we’ll be walking you through all the steps required to flash your Spreadtrum phone like a pro. So buckle up and get ready for a brand new experience with your old device!
Download and install the Spreadtrum USB driver on your computer
If you want to flash a Spreadtrum phone, you need to download and install the Spreadtrum USB driver on your computer. This is a simple process that only takes a few minutes.

First, go to the Spreadtrum website and download the driver. Next, unzip the file and run the setup program. Follow the prompts to install the driver on your computer.

Once the installation is complete, restart your computer. Now you’re ready to flash your Spreadtrum phone!
Download and extract the SP Flash Tool file on your computer

1. Download and extract the SP Flash Tool file on your computer.
2. On your computer, open the extracted SP Flash Tool folder and double-click on flash_tool.exe to launch the tool.
3. In the SP Flash Tool, click on the Scatter-loading button at the top left corner of the window.
4. In the “Choose a Scatter file” window that opens, navigate to the location where you extracted the firmware file in Step 1 and select the scatter file (MTxxxx_Android_scatter.txt) in that folder. Then click on Open.
5. Now, all the firmware files will be loaded into SP Flash Tool.
6. Click on Download button in SP Flash Tool to begin flashing process.
7. Connect your Spreadtrum phone to your computer using a USB cable and wait till you get a blue tick in SP Flash Tool indicating that your device has been detected successfully by it (this usually happens within 10-15 seconds after you connect your phone).
8. As soon as you get this blue tick mark, press and hold down Power button + Volume Up button on your Spreadtrum phone till you see a green circle with a tick mark inside it at top right corner of SP Flash Tool window (indicating successful flashing).
9. You can now safely disconnect your phone from computer and power it ON!
   Launch the SP Flash Tool application and load the scatter file from the firmware folder
   Assuming you have already downloaded and extracted the firmware for your Spreadtrum phone, launch the SP Flash Tool application. From the main screen of the application, click on “Choose” next to the “Scatter-loading File” option. This will open a file explorer window. Navigate to the folder where you extracted the firmware and select the scatter file. Click “Open” to load the file and return to the main screen of SP Flash Tool.
   Connect your Spreadtrum smartphone or tablet to the computer using a USB cable
   Assuming you have all the necessary drivers installed, connect your Spreadtrum smartphone or tablet to the computer using a USB cable. Once connected, open up the SP Flash Tool you downloaded earlier. In the “Scatter-loading File” field, click the “…” button and locate the scatter file for your device. If you don’t have a scatter file, you can usually find one by doing a Google search for “[device name] scatter file.”

Once the scatter file is loaded, make sure all the boxes in the “Download Agent” section are checked. Then, in the “Memory Test” or “Verify Memory” field, select “Readback.” This will cause the SP Flash Tool to read back and verify the contents of your device’s ROM. If everything looks good, go ahead and click on the “Download” button.

The SP Flash Tool will now begin flashing your device. Do not disconnect your device from the computer during this process! Once flashing is complete, you should see a “Success” message in green at the bottom of the window. You can now safely disconnect your device from the computer and power it on.
Click on the Download button in SP Flash Tool to begin the flashing process
Once you have extracted the contents of the SP Flash Tool ZIP file and launched the application, you will see the main SP Flash Tool interface. In the “Scatter-loading File” field, click on the “Choose” button and select the scatter file for your Spreadtrum device. Once your scatter file has been loaded, all of the partition images in that file will be displayed in the “Available Partition” field.

To begin the flashing process, simply click on the “Download” button. The SP Flash Tool will then start writing the selected partition images to your Spreadtrum device. Once it is finished, you will see a “Download OK” message indicating that the process was successful.
Disconnect your device from the computer once the flashing process is completed
If you’re flashing a Spreadtrum phone, the process is simple and straightforward. Once you have the required files downloaded, you’ll need to connect your phone to the computer. After that, simply follow the on-screen prompts to complete the flashing process.

Once the process is completed, it’s important to disconnect your device from the computer. This will help prevent any potential issues and ensure that your phone is functioning properly.